Answer

Mar 26, 2025 - 07:54 AM
To set up the DARTWOOD B09V4YY2VJ Astronomical Telescope, follow these steps:
1. Gently pull the tripod legs apart until the center leg braces sit flat.
2. Place the tab on the bottom of the telescope into the slot at the top of the tripod.
3. Firmly tighten the xxxx at the top of the tripod head.
4. xxxx the aiming control arm into the hole at the rear of the mount.
5. Insert the H20 mm eyepiece into the diagonal mirror.
6. Remove the dust cap from the large end of the telescope before using.
For more detailed instructions and illustrations, please refer to the user manual provided with the telescope.
Note: Always ensure that the telescope is set up on a stable surface and that the mounting lock button is securely locked to prevent any accidental movement during use.
Add New Comment