Answer

Mar 26, 2025 - 05:25 AM
To clean the burners on your Amana AGR6603SFS gas range, follow these steps:
1. Before cleaning, make sure all controls are off and the cooktop is cool. Do not use oven cleaners, bleach, or rust removers. Do not wash in the dishwasher.
2. Remove the burner cap from the burner base and clean it according to the "General Cleaning" section in the Owner's Manual.
3. Clean the gas tube opening with a damp cloth.
4. Clean clogged burner ports with a straight pin. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.
5. Replace the burner base. The burner bases and caps must be properly positioned before cooking. Each round burner base is marked with a letter indicating the burner size.
6. Replace the burner cap, making sure it is properly aligned with the burner base. If burner caps are not properly positioned, surface burners will not light. The burner cap should not rock or wobble when properly aligned.
7. Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, turn off the burner. Do not service the burner yourself. Contact a trained repair specialist.
For more detailed instructions and illustrations, please refer to the "Sealed Surface Burners" section in the Owner's Manual of your Amana AGR6603SFS gas range.
Add New Comment