User Manual Q&AAnswer
Mar 26, 2025 - 05:23 AM
To switch between different temperature units on the PCE-HVAC 3 Hygrometer, follow these steps:
1. Press the power button to switch on the hygrometer.
2. Place the hygrometer's sensor in the area where the measurements are to be made.
3. Wait until the measurement value has stabilized.
4. Press the MODE button several times to choose between relative humidity (RH%), absolute moisture in grams per cubic meter (g/m³), or absolute moisture in grams per cubic foot (g/ft³).
5. To change the temperature unit, press the °C / °F button until either °C or °F is displayed in the bottom right corner of the display.
6. The displayed measurement value will now show the temperature in the chosen temperature unit.
Please refer to the "Operation" section of the user manual for more detailed instructions and illustrations.
Add New Comment