User Manual Q&AAnswer
Mar 26, 2025 - 05:07 AM
To prepare the ground for the swim and fun 1944 to 1945 Santorini XL Pool, follow these steps:
1. Select a solid and completely flat surface for the pool installation. The pool must be placed on a level ground.
2. Choose a location that is away from trees to prevent problems with fallen leaves in the pool.
3. Ensure that the selected location has access to electricity and water.
4. For safety reasons, avoid installing the pool in locations where children have easy access.
5. Place a marking peg in the middle of the selected location and tie a string to it. The length of the string should be equal to the radius of the pool plus an additional 25 cm.
6. Use spray paint or sand to mark the circumference of the pool on the ground, following the string.
7. Dig and remove any soft grassy surface or debris from the pool area. The base of the pool must be solid and level.
8. Use a spirit level taped to a plank that is two meters long to check if the base is level in multiple places.
9. Once the base is level, remove any excess material and ensure that all small stones, twigs, branches, and roots are cleared from the pool area.
10. Place a ground cover under the pool to minimize wear and tear to the liner and prevent punctures from stones and roots.
By following these steps, you will properly prepare the ground for the swim and fun 1944 to 1945 Santorini XL Pool installation. For more detailed instructions and safety information, please refer to the product manual.
Add New Comment