User Manual Q&AAnswer
Mar 26, 2025 - 05:02 AM
To connect the MUSWAY M12 amplifier to your vehicle's power supply, follow these steps:
1. Disconnect the ground connection from the vehicle's battery before starting the installation.
2. Connect the POWER + terminal of the amplifier to the +12V pole of the vehicle's battery using a suitable cable with a sufficient cross-section.
3. Connect the POWER - terminal of the amplifier to a suitable contact ground point on the vehicle's chassis. Ensure that the ground wire is as short as possible and has a stable and safe electric connection to the negative "-" pole of the battery.
4. Install an extra fuse (not included) for the +12V power cable near the battery to secure the power cable. The fuse size must be adapted to the cable cross-section of the installed power cable.
5. Connect the REM IN/OUT terminals of the amplifier according to your setup. The REM IN terminal can be used to turn on the amplifier if a turn-on signal from the head unit/car stereo is available. The REM OUT terminal can be used to turn on external amplifiers.
6. Ensure that all terminals are correctly connected, and all connections are tight.
7. Reconnect the ground connection to the vehicle's battery.
Please refer to the for more detailed instructions and illustrations on the installation process.
Add New Comment