User Manual Q&AAnswer
Mar 26, 2025 - 04:52 AM
There are two ways to match the Skydance V5-M controller with the remote control.
1. Using the controller's Match key:
- Short press the Match key on the controller.
- Immediately press the On/Off key (for single zone remote) or Zone key (for multiple zone remote) on the remote.
- The LED indicator on the controller will fast flash a few times, indicating a successful match.
2. Using Power Restart:
- Switch off the power of the controller, then switch it back on. Repeat this step.
- Immediately short press the On/Off key (for single zone remote) or Zone key (for multiple zone remote) three times on the remote.
- The light on the controller will blink three times, indicating a successful match.
Note: To delete all matches, press and hold the Match key on the controller for 5 seconds. The LED indicator will fast flash a few times, indicating that all matched remotes have been deleted.
Please refer to the Skydance V5-M 5 Channel RGB+CCT LED RF Controller User Guide for more detailed instructions and illustrations.
Add New Comment