Answer

Mar 26, 2025 - 04:45 AM
To install the , please follow the steps below:
1. Begin by determining the desired height and position for your TV on the wall. Ensure that the wall can support the weight of both the TV and the wall mount.
2. Locate the wall studs using a stud finder and mark their positions on the wall.
3. Attach the wall plate of the TV wall mount to the wall using the provided screws and wall plugs. Make sure to align the wall plate with the marked positions of the wall studs for maximum stability.
4. Once the wall plate is securely attached, attach the TV brackets to the back of your TV. The TV brackets should align with the VESA hole pattern on the TV. Use the provided screws and washers to secure the brackets to the TV.
5. With the help of another person, carefully lift the TV and align the TV brackets with the wall plate. Ensure that the brackets securely hook onto the wall plate.
6. After the TV is hooked onto the wall plate, adjust the tilt and level of the TV using the TiltAnchor™ feature. This allows you to easily lock and release the tilt angle of the TV.
7. To achieve the desired viewing angle, use the OneFinger™ Movement feature to smoothly move the TV up to 180°.
8. Once the TV is in the desired position, tighten the screws on the TV brackets to secure the TV in place.
9. Use the included cable management clips to neatly organize and conceal your TV cables.
10. Finally, use the included spirit level to ensure that the TV is perfectly level both horizontally and vertically.
Please note that this answer provides a general overview of the installation process. For detailed instructions and illustrations, please refer to the vogel s TVM 3665 Full-Motion TV Wall Mount User Manual.
Add New Comment