Answer

Mar 26, 2025 - 04:44 AM
To install the NOR DESIGN 216205205 Galaxy 150 lighting fixture correctly and safely, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before installing the housing, take note of the arrow mark inside the housing and cover. The arrow mark should be used to install the housing in the same direction as the cover.
2. Always isolate the power before commencing installation, maintenance, or repair. This ensures your safety during the installation process.
3. If you are unsure about the installation process, it is recommended to consult a qualified electrician or contact your retail outlet for assistance. They can provide guidance based on your specific electrical setup.
4. Make sure to install the fitting according to the local regulations. Different regions may have specific requirements for electrical installations, so it is important to adhere to these regulations.
5. Tighten all electrical mounting parts securely. This applies to both 230V and 12V connections. Properly tightened connections ensure a safe and reliable electrical connection.
6. When connecting the wires, pay attention to the color coding. Typically, blue or black wires indicate the neutral wire, brown, red, or white wires indicate the live wire, and in the case of protection class I, yellow/green wires indicate the earth wire. Make sure to connect the wires correctly to avoid any electrical hazards.
7. Take care not to damage the wires when mounting the fixture. Handle the wires with care to prevent any cuts or breaks that could affect the electrical connection.
8. Clean the fixture with a dry cloth. Avoid using abrasives or solvents, as they may damage the fixture's surface or components.
9. Keep electrical parts away from liquids to prevent electrical hazards. Ensure that the fixture is installed in a dry location and avoid exposing it to water or other liquids.
10. If the external flexible cable or cord of the luminaire is damaged, it should be exclusively replaced by the manufacturer, their service agent, or a similar qualified person. This ensures the safety and proper functioning of the fixture.
11. Always consider all the technical specifications of the fixture. Verify the stated icons on the label of the fixture and compare them with the icons shown in the mounting instructions. This ensures that the fixture is installed correctly and in accordance with its intended use.
For more information and specific details, please refer to the NOR DESIGN 216205205 Galaxy 150 Instruction Manual provided with the product.
Add New Comment