Answer

Mar 26, 2025 - 04:03 AM
To connect the TRIPP LITE U444F3-50M-H4K6 USB C to HDMI Fiber Active Optical Cable, follow these steps:
1. Identify the source device: Make sure you have a device with a USB-C or Thunderbolt 3 port that supports USB DisplayPort Alternate Mode. This could be a MacBook, Windows laptop, or any other compatible device.
2. Identify the display device: Ensure that you have a display device with an HDMI input, such as an HDTV, monitor, or projector.
3. Check the cable direction: Before installation, make sure to check the Source and Display labels on the connectors of the cable. The cable must be installed in the correct direction to function properly.
4. Connect the cable: Plug the USB-C male connector of the cable into the USB-C or Thunderbolt 3 port on your source device. Then, connect the HDMI male connector of the cable to the HDMI input on your display device.
5. Power the connection: The cable draws power from the connected device, so no external power supply is required. Ensure that both the source and display devices are powered on.
6. Configure the source device: If your source device supports USB DisplayPort Alternate Mode, it should automatically detect the connected display and output the video and audio signals. No special software drivers are required.
7. Enjoy your content: Once the cable is connected and the source device is configured, you should be able to enjoy razor-sharp 4K video with HDR and 4:2:2 color on your display device.
Please refer to the product manual for any additional information or troubleshooting steps.
Add New Comment