User Manual Q&AAnswer
Mar 26, 2025 - 03:55 AM
To clean the display of the Beijer X2 marine 15 - B2 HB SC operator panel, follow these steps:
1. Regular cleaning: Use a dry, clean cloth to wipe off dust regularly. This will help keep the display clean and free from smudges.
2. Cleaning agents: If necessary, you can use alcohol or ammonia-based cleaning agents for more thorough cleaning. However, it is important to follow the manufacturer's instructions when using these agents. Do not spray the cleaning solution directly onto the panel surface. Instead, apply the cleaning agent to a clean cloth and wipe the touch panel surface in a "Z" motion.
3. Removing residue: After cleaning, use a dry cloth to thoroughly dry the panel and remove any residue from the cleaning solution.
4. Avoid corrosive cleaners: Do not use cleaning solutions containing bleach, alcohol, ammonia, or other corrosive substances, as they can damage the touch panel surface coatings and ITO film.
Note: It is important to avoid using sharp tools, air guns, water jets, or steam to clean the surface of the touchscreen, as they may damage the touchscreen functionality. If any condiments, food, or drinks are spilled on the surface of the touchscreen, remove them immediately. Also, ensure that moisture does not seep through the cable connection area from the edges during cleaning.
For more detailed information and recommendations, please refer to the "Cleaning the Display" section in the Beijer X2 marine 15 - B2 HB SC Instruction Manual.
Add New Comment