User Manual Q&AAnswer
Mar 26, 2025 - 02:41 AM
To configure and drive content on the CHAUVET PROFESSIONAL F3X Chauvet Video panel, you will need to use the VIP Drive 43Nova 2 or the VIP Drive 83R Nova, powered by the Novastar control protocol. These devices allow you to easily configure and control the video panel. The Novastar control protocol provides a user-friendly interface for managing the content displayed on the panel.
To set up the panel, connect the VIP Drive device to the video panel using the provided Seetronic etherKON IP65 data connectors. Power the panel using the Edison (Local) plug to Seetronic etherKON IP65 power connection. Make sure to follow the cable length guidelines mentioned in the manual.
Once the panel is connected and powered, you can use the Novastar control protocol to configure the content. The VIP Drive devices support various resolutions and refresh rates, allowing you to customize the display according to your requirements. Refer to the manual for specific details on the maximum number of panels and resolution options supported by each VIP Drive device.
Additionally, the manual provides information on optional accessories such as rig bars, ground support systems, and curving kits that can enhance the installation and setup of the video panel.
For more detailed instructions and troubleshooting information, please refer to the CHAUVET PROFESSIONAL F3X Chauvet Video Instruction Manual available on the CHAUVET Professional website.
Add New Comment