Answer

Mar 26, 2025 - 02:38 AM
To adjust the cutting height of the lawn mower, follow these steps:
1. Disconnect the mower from the power supply and ensure that the blade has stopped turning before adjusting the height.
2. For the front wheel, turn the mower upside down and pull the wheel shaft towards the front of the mower.
3. Set the wheel shaft to the desired cutting height adjustment position. Make sure that both the right and left front wheels are in the same cutting height adjustment position.
4. For the rear wheel, turn the mower upside down and pull the rear wheel axle towards the catcher of the mower.
5. Set the wheel shaft to the desired cutting height adjustment position. Again, ensure that both the right and left rear wheels are in the same cutting height adjustment position.
6. The mower offers three cutting height positions: 25mm, 45mm, and 65mm. Adjust the wheels accordingly to achieve the desired cutting height.
Please refer to the assembly instructions and diagrams provided in the manual for a better understanding of the process.
Add New Comment