Answer

Mar 26, 2025 - 02:32 AM
To adjust the length of the pendant light fixture, follow these steps:
1. Determine the desired stem length and select the appropriate rods (B & C) to configure the stem.
2. Feed the fixture wires from the lamp shade (D) through the loop without xxxx (GG). Twist the loop (GG) onto the lamp shade (D).
3. Connect the loop with xxxx (HH) and loop without xxxx (GG) together using a chain link connector (AA).
4. Thread the canopy loop (II) through the canopy (A) and secure with a lock washer (FF) and hex nut (DD).
5. Thread the wires through the tubes (B and/or C), the loop with xxxx (HH), and through the canopy (A).
6. Connect the loop with the xxxx (HH) and canopy loop (II) together using a chain link connector (AA).
7. xxxx the components together until they are secured and do not come loose.
By following these steps, you can adjust the length of the pendant light fixture to your desired configuration.
Add New Comment