Answer

Mar 25, 2025 - 12:20 PM
To connect the LLOYDS LC-1344 Smart LED strip to your smartphone, follow these steps:
1. Make sure your smartphone has iOS 10.0 or higher or Android™ 4.4 or higher.
2. Check your network and ensure that you are connected to a 2.4 GHz Wi-Fi channel.
3. Download the Lloyds Smart app from the App Store or Google Play, or scan the provided QR code with your smartphone.
4. Launch the Lloyds Smart app and click on "Sign Up" to register.
5. Agree to the terms and conditions, choose your country, and enter your email address.
6. Click on "Get Verification Code" and enter the code sent to your email.
7. Set a password and click "Done" to complete the registration process.
8. Start the Lloyds Smart app on your smartphone and select the "+" icon in the upper right corner.
9. Choose the type of device you want to add, in this case, select "Lighting" and then "Smart Neon LED strip."
10. Enter your Wi-Fi network information and password, and click "Next."
11. Connect the LED strip to the power supply, disconnect it, and then connect it again. Repeat this procedure three times.
12. Confirm from the app that the lights are flashing rapidly, and then click "Next."
13. Once the device is configured, you can change its name if desired, and then click "Done."
After completing the setup, you can control the LLOYDS LC-1344 Smart LED strip through the app from anywhere as long as you have an internet connection.
Add New Comment