Answer

Mar 25, 2025 - 12:12 PM
To adjust the temperature settings on the fireplace, follow these steps:
1. Press the heater button (4) on the control panel to turn on the heater.
2. Press the heater button multiple times to cycle through the temperature settings, starting at 82°F down to 62°F, then Always OFF or Always ON (27°C - 17°C - OFF - ON).
3. After you release the heater button, your preferred temperature setting will be flashing on the display (1).
4. Once it stops flashing and the display goes dark, the thermostat will be set at your preferred temperature.
5. Note that the "ON" setting keeps the heater always on until you power off the unit or the safety sensor turns off the heater to prevent overheating.
Please refer to the "Using the Heater Control" section in the user guide for more detailed instructions and information.
Add New Comment