Answer

Mar 25, 2025 - 11:33 AM
To pair the GRADO 786GW100X Wireless Bluetooth Headphones with your device, follow these steps:
1. Ensure that the headphones are turned off. If they are already on, long-press the power button to turn them off.
2. Connect the provided USB-C cable to the charging port on the headphones and the other end to a compatible USB port on your computer or wall charger to charge the headphones if needed.
3. Once the headphones are charged or if they are already charged, long-press the power button until the charging light starts flashing blue and red. This indicates that the headphones are ready to pair.
4. On your device, navigate to the settings menu and turn on Bluetooth.
5. After a few seconds, you should see "Grado GW100x" listed in the available Bluetooth devices. Tap on it to pair the headphones with your device.
6. Once the pairing is successful, you will hear a notification sound or see a confirmation message on your device.
Note: If the Bluetooth on your device is turned off or if it goes out of range, the GRADO 786GW100X headphones can automatically connect to a second device.
Please refer to the owner's manual for more detailed instructions and troubleshooting tips.
Add New Comment