User Manual Q&AAnswer
Mar 25, 2025 - 10:56 AM
To add additional cameras to the Kogan KAS8C4W1TBB security system, you can use either the "auto add" or "match code" method in the Video Management settings on the NVR.
1. Make sure the cameras' antennas are positioned parallel to the Wi-Fi signal transmission and not angled directly at the router.
2. The cameras can be set up with a wired network connection if desired.
3. Connect a keyboard, mouse, and monitor with HDMI or VGA input to the NVR to configure the operating system.
4. Install antennas for cameras and NVR.
5. Connect a monitor via HDMI or VGA.
6. Connect the NVR to power using the larger 12V 2A power adaptor.
7. Connect the cameras to power using the smaller 12V 1A power adaptors.
8. The camera feed should display within a few seconds.
9. Connect the included USB mouse to a USB port on the rear of the unit.
For more detailed instructions and troubleshooting, please refer to the user guide provided with the product or visit the online help.kogan.com for the most up-to-date information.
Add New Comment