Answer

Mar 25, 2025 - 10:05 AM
To install the BLAUBERG S-Vent Centrifugal Fan, follow these steps:
1. Disconnect the unit from the power mains before starting the installation.
2. Carefully unpack the unit.
3. Ground the fan to ensure safety.
4. Follow the safety regulations specific to the use of electric tools while installing the unit.
5. Do not change the power cable length or bend it.
6. Avoid damaging the power cable and do not put any foreign objects on it.
7. Do not lay the power cable of the unit in close proximity to heating equipment.
8. Use undamaged equipment and cables when connecting the unit to power mains.
9. Make sure to operate the unit within the specified temperature range and avoid operating it in aggressive or explosive environments.
10. Do not touch the unit controls with wet hands and avoid carrying out installation and maintenance operations with wet hands.
11. Do not wash the unit with water and protect the electric parts of the unit against water ingress.
12. The unit should not be operated by children or persons with reduced physical, mental, or sensory capacities, or those without the appropriate training.
13. Disconnect the unit from power mains before any technical maintenance.
14. Store any explosive or highly flammable substances away from the unit.
15. If the unit generates unusual sounds, odor, or emits smoke, disconnect it from power supply and contact the Seller.
16. Do not open the unit during operation.
17. Do not direct the air flow produced by the unit towards open flame or ignition sources.
18. Do not block the air duct when the unit is switched on.
19. Periodically check the security of mounting if the unit is operated continuously.
20. Do not sit on the unit and avoid placing foreign objects on it.
21. Use the unit only for its intended purpose.
Please refer to the user manual for detailed installation instructions and safety precautions.
Add New Comment