User Manual Q&AAnswer
Mar 25, 2025 - 08:21 AM
To install the Stealth Products P144D562 Simple Solutions Tray on your wheelchair, follow these steps:
1. Place the plastic tray over the track mounts, aligning the holes of the tray with the holes in the track mounts.
2. Use a 3mm hex key to tighten the M5 x 0.8 x 20mm Flat Head screws to secure the tray to the hardware. Make sure the screws are flush with the plastic to create a clean surface. Do not overtighten as it can damage the plastic.
3. Loosen the stop collar using a 3mm hex key and slide it forward on the tube.
4. Insert the tube into the clamp and adjust it to the appropriate depth. Lock it using the latch on the clamp.
5. Slide the stop collar along the tube, against the clamp, and tighten it in place using a 3mm hex key.
For more detailed instructions and illustrations, please refer to the "Installation Instructions" section of the Stealth Products P144D562 Simple Solutions Tray Owner's Manual.
Add New Comment