User Manual Q&AAnswer
Mar 25, 2025 - 08:06 AM
The installation process for the JAGUAR IP-JAG98 30-pin Adapter CD Changer varies depending on the model and audio system of your Jaguar. Here are the general steps for installation:
1. Disconnect the negative battery terminal.
2. Remove the "J" gate finisher and plate.
3. Remove the center console veneer panel.
4. Lift the radio over the gear selector hub and remove it from the dash.
5. Disconnect the CD changer plug from the radio.
6. Connect the CD changer plug to the module's female connector.
7. Connect the module's male plug to the radio's CD changer port.
8. Connect the Apple 30-pin dock cable to the module and the 8-pin mini-DIN port.
9. Route the dock cable to the desired mounting location within 12 ft. of the radio.
10. Securely install the plug and cable in a location away from heat, humidity, moving parts, or sharp metal objects.
For more specific instructions and diagrams, please refer to the instruction manual provided with the product.
Please note that this is a general installation guide, and some vehicles may require additional steps. It is recommended to exercise due diligence and consult a professional if needed.
Add New Comment