How do I install the CANARM Pendant Light? (CANARM Pendant Light Instruction Manual)

Answer

manuals.plus

Mar 22, 2025 - 04:45 AM

To install the CANARM IPL431A01ORB Pendant Light, please follow these steps:

1. Turn off the electrical power before starting the installation of the light fixture.
2. Install the required length of rod by threading the wire through the rod and screwing it to the fixture. Make sure to install the swivel to the rod, ensuring that the sleeve is at the swivel.
3. Loosen "B" and adjust the stud to the desired length. Lock it in place with "B".
4. Mount the mounting bracket to the electrical box using electrical box screws (not included). Ensure that the studs on the mounting bracket are facing out from the electrical box.
5. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground xxxx in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box, and connect the white wire from the fixture to the white wire in the electrical box.
6. Once the connections of wires are completed, carefully tuck the wires and wire nuts into the electrical box, making sure no bare wire is visible at the wire nuts.
7. Position the fixture over the studs on the mounting bracket assembly and secure it in place with star washers and cap nuts.
8. Remove the spinner nut from the socket. Position the glass on the lamp and secure it with the spinner nut.
9. Install the specified bulb type and wattage (not included).

Please note that these instructions are a summary, and it is important to refer to the complete instruction manual provided with the product for detailed installation steps and safety precautions.