How do I connect the ClearOne UNITE 200 Pro PTZ HD Camera to power and other devices? (ClearOne UNITE PTZ HD Camera User Guide)

Answer

manuals.plus

Mar 22, 2025 - 04:44 AM


To connect the ClearOne UNITE 200 Pro PTZ HD Camera to power and other devices, follow these steps:

1. Power options:
   - Option 1: Use the PoE splitter to connect to power and ethernet.
   - Option 2: Use the AC adapter and an ethernet cable to connect the RJ-45 port to an external device.

2. Set Switches:
   - On the bottom of the camera, set both switch 1 and switch 2 to Off.

3. Video System Switch:
   - On the backplane of the camera, set the video system switch to the desired video format option. Refer to the provided table in the manual for available options.

4. Start Up:
   - If you are not using the PoE splitter, connect the AC power adapter to a power source.
   - On the back panel of the camera, set the Power Switch to On.

When the camera starts up, it will go through an initialization process where the Pan-Tilt rotates to the maximum position of top right and then returns to the center position. If the position preset 0 has been stored, it will be called up after initialization.

Note: If you want to restore the factory default settings, you can do so by accessing the On-screen Display (OSD) menu using the Menu button on the remote control. Select Menu > Restore Default > Restore, set the value to Yes, and press the HOME button.

For more detailed information on using the ClearOne UNITE 200 Pro PTZ HD Camera, refer to the UNITE 200 Pro User Manual available in the ClearOne Resource Library.