Answer

Mar 22, 2025 - 04:22 AM
Programming the speeds on the Hayward W3SP2615X20XE Super Pump XE is a simple process. Here's how you can do it:
1. Make sure the pump is powered off and disconnected from the power source.
2. Locate the control panel on the pump. It should have buttons for speed selection.
3. Press the "Program" or "Speed" button to enter the programming mode.
4. Use the "+" and "-" buttons to navigate through the available speed options. The pump allows you to select up to 6 different speeds.
5. Once you have selected the desired speed, press the "Enter" or "Program" button to save the setting.
6. Repeat the process for each speed you want to program.
7. After programming all the speeds, you can exit the programming mode by pressing the "Exit" or "Mode" button.
Please refer to the user guide for specific instructions and illustrations on programming the speeds of the Hayward W3SP2615X20XE Super Pump XE.
Add New Comment