User Manual Q&AAnswer
Mar 22, 2025 - 03:29 AM
To install the ink cartridges in the EPSON WF-2930 All-in-One Inkjet Printer, please follow these steps:
1. Lift up the scanner unit until it locks into place.
2. Gently shake the black ink cartridge (do not shake the other ink cartridges).
3. Unpack the ink cartridges.
4. Remove only the yellow tape from each ink cartridge.
5. Insert the cartridge in the holder for each color. Press each cartridge down until it clicks. Make sure all cartridges are pushed down into place.
6. Lower the scanner unit: Lift the scanner unit up slightly and lower it. When the scanner unit catches, lift it up again and lower it completely.
7. WF-2930: Press the OK button.
WF-2950: Select "Installed" and press OK.
8. The printer will start charging the ink. When you see a completion message on the printer's LCD screen, charging is complete.
Caution: Do not turn off the printer or raise the scanner unit while the printer is charging or you'll waste ink.
Please refer to the EPSON WF-2930 All-in-One Inkjet Printer User Guide for more detailed instructions and illustrations.
Add New Comment