Answer

Mar 22, 2025 - 02:39 AM
To charge the internal battery of the Gyspack Heritage Arc Welding Battery Charger, follow these steps:
1. Ensure the device is turned off by turning the xxxx to the "OFF" position.
2. Connect the Gyspack Heritage to the provided charger. Only use the charger supplied with the device.
3. Plug the charger into a single-phase power supply.
4. The charger's red LED will indicate that the device is being charged.
5. Once the LED turns back to green, the device is fully charged.
It is recommended to charge the device after each use and to store it in a well-ventilated area. Charging the device on the mains periodically is also necessary to extend the lifespan of the product.
Please refer to the "Charge the Internal Battery" section in the instruction manual for more detailed instructions and safety precautions.
Add New Comment