How do I install the OAKLEAF STOVES Cedar 5 Widescreen Multifuel Freestanding Stove? (OAKLEAF STOVES Cedar 5 Widescreen Multifuel Freestanding Stove Instruction Manual)

Answer

manuals.plus

Mar 22, 2025 - 02:38 AM

To install the OAKLEAF STOVES Cedar 5 5kW Widescreen Multifuel Freestanding Stove, it is important to follow the instructions provided in the manual and have it installed by a suitably qualified engineer. Here are the general steps for installation:

1. Ensure that you are in compliance with local regulations and building codes regarding stove installation.
2. Choose a suitable location for the stove, keeping in mind the minimum clearance requirements to combustible materials.
3. Prepare the floor or hearth where the stove will be installed, ensuring it can bear the weight of the stove.
4. Check the chimney for any blockages or damage. The chimney must conform to building regulations, with a minimum height of 4.5m and a recommended minimum diameter of 125mm.
5. Install the flue pipe connector provided with the stove, either for top or rear mounting, using the supplied fixing screws. Ensure the fireproof gasket is correctly seated in the base of the flue adaptor.
6. If using the rear mounting flue configuration, install the blanking plate in the rear of the stove. If using the normal flue exit, install the blanking plate in the top of the stove.
7. Once the stove is properly installed, it is important to have a CO monitor installed in the same room as the stove.

Please note that these are general installation steps, and it is recommended to refer to the specific instructions provided in the OAKLEAF STOVES Cedar 5 5kW Widescreen Multifuel Freestanding Stove Instruction Manual for detailed installation guidelines and safety precautions.