User Manual Q&AAnswer
Mar 22, 2025 - 02:25 AM
Sure! Here are the step-by-step instructions on how to install the In Win 125 PLUS Bronze Power Supply:
1. Before starting the installation, make sure the power supply's AC power cable is not connected.
2. Place the power supply unit into the designated space in your PC case and secure it with screws.
3. Connect the 24-pin power cable to the 24-pin socket on your motherboard. This provides power to the motherboard.
4. Connect the 8-pin +12V cable to the corresponding socket on your motherboard. If your motherboard has an 8-pin +12V socket, connect the 8-pin cable directly. If your motherboard has a 4-pin socket, detach the 4-pin from the 8-pin cable and plug it directly into your motherboard.
5. Connect the peripheral cables, PCI-Express cables, and SATA cables to their appropriate sockets on your devices (hard drives, graphics cards, etc.). Make sure they are tightly connected.
6. Save any unused modular cables for future use.
7. Connect the AC power cord to the power supply and switch the power button to the "I" position.
That's it! Your In Win 125 PLUS Bronze Power Supply should now be installed and ready to power your PC. If you encounter any difficulties during the installation process or have any further questions, it is recommended to contact your local distributor for support or refer to the In Win retail website for more detailed information on the warranty and product specifications.
Add New Comment