User Manual Q&AAnswer
Mar 22, 2025 - 02:13 AM
To connect the AIRAM 7126610 Wifi Smart Water Leakage Alarm to the Airam SmartHome app, please follow these steps:
1. Make sure you have downloaded and installed the Airam SmartHome app on your smartphone or tablet. The app is available for both iOS and Android devices.
2. Open the Airam SmartHome app and create an account if you haven't already done so. Follow the on-screen instructions to set up your account.
3. Once you have logged into the app, tap on the "+" or "Add Device" button to add a new device.
4. Select "Water Leakage Alarm" from the list of available devices.
5. Follow the on-screen instructions to put the water alarm into pairing mode. This usually involves pressing and holding a button on the device until it starts flashing or beeping.
6. The app will search for nearby devices. When the water alarm is found, select it from the list of available devices.
7. Enter your Wi-Fi network credentials (SSID and password) when prompted. Make sure you have a stable Wi-Fi connection in the area where you plan to install the water alarm.
8. Wait for the app to connect the water alarm to your Wi-Fi network. This process may take a few moments.
9. Once the connection is established, you should see a confirmation message in the app. The water alarm is now successfully connected to the Airam SmartHome app.
10. You can now customize the settings and notifications for the water alarm through the app. This includes setting up alerts, adjusting the sensitivity, and managing other features.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment