User Manual Q&AAnswer
Mar 22, 2025 - 01:54 AM
To connect the SALTER 9159 SV3R Analyser Bathroom Scale to your mobile device via Bluetooth, please follow these steps:
1. Ensure that Bluetooth is enabled on your mobile device.
2. Step on the center of the scale platform to turn on the scale.
3. Choose a user number for your measurements.
4. Press and hold the unit button on the rear of the scale until the animation appears.
5. Place the scale on a firm, flat surface and press the center of the platform with your foot to turn it on.
6. Press the button and use the buttons to select your user number.
7. Wait for the scale to confirm your personal data and show a zero reading.
8. When zero is displayed, step onto the platform with bare feet and stand still. The scale will weigh you and measure other values using BIA analysis.
9. If your scale is on and your app is open, your data will be synced automatically. If the scale is unable to connect, your data will be saved on the scale until a connection is available.
10. You can sync your saved data at any time by opening the app, pressing on the center of the platform to turn on the scale, and then selecting your user number.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment