Answer

Mar 22, 2025 - 01:37 AM
To clean the Exiom 00014 445W Half-Cut Solar Module, follow these steps:
1. Use a soft, dry or damp cloth to clean the front face of the module. Avoid using abrasive materials that could damage the coating layer of the glass.
2. If necessary, you can use neutral water to clean the glass of the modules. However, do not use any chemicals as they can affect the module's warranty and power production.
3. It is recommended to clean the modules preferably twice a year, depending on site conditions. Choose a time when solar radiation is low, such as early morning or late evening, when the modules are at a lower temperature.
4. Regular visual inspections should also be carried out to check for any defects or damage to the modules. If you notice any broken glass or sharp objects in contact with the surfaces of the module, contact your installer.
Please refer to the Exiom 00014 445W Half-Cut Solar Module Instruction Manual for more detailed instructions and safety precautions regarding cleaning and maintenance.
Add New Comment