Answer

Mar 22, 2025 - 12:34 AM
To install the Uolfin 5069564 3-Light Dark Gold with Fabric Modern, please follow these steps:
1. Before starting the installation, make sure to turn off the electricity. Go to the main fuse or circuit breaker box in your home and place the main power switch in the "OFF" position. Also, turn off the wall switch.
2. Ensure that the mounting surface is clean, dry, flat, and strong enough to hold the lamp. It should be 1/4" larger than the canopy on all sides. If there are any gaps exceeding 3/16", correct them as required.
3. Check that the ceiling or wall can support the weight of the lamp before installation.
4. Make sure you are using a voltage of 120V, and do not exceed a maximum wattage of 40W per bulb.
5. Keep the lamp away from acidic and alkaline substances to avoid damaging the surface.
6. When replacing a bulb, turn off or unplug the lamp and wait until it is cool, as bulbs can get hot quickly.
7. The safety instructions provided in the manual are not exhaustive. Always exercise common sense, caution, and care when working with electrical products.
For detailed assembly and installation instructions, please refer to the complete instruction manual provided with the product.
Add New Comment