User Manual Q&AAnswer
Mar 22, 2025 - 12:27 AM
To clean the surface burners on your Whirlpool gas range, follow these steps:
1. Make sure the burners and cooktop are cool before cleaning.
2. Remove the grates from the cooktop.
3. Remove the burner caps from the burners.
4. Clean the burner caps and grates with warm, soapy water using a nonabrasive plastic scrubbing pad. Rinse them thoroughly and dry them before reassembling.
5. Use a damp cloth to clean the gas tube opening, which is located under the burner caps. Make sure it is free from any debris or spills.
6. Check the burner ports for any clogs. If you see any debris or buildup, use a straight pin to gently clean the ports. Do not enlarge or distort the ports, and avoid using a wooden toothpick.
7. Once the burner caps and grates are dry, reassemble them on the cooktop.
8. Turn on each surface burner to ensure they are working properly and producing a blue flame. If the flames are still uneven or yellow, contact a trained repair specialist for further assistance.
Note: It is important to clean the surface burners regularly to maintain their performance and prevent any blockages that may affect their operation.
Add New Comment