User Manual Q&AAnswer
Mar 22, 2025 - 12:21 AM
To use the AquaLift Self-Cleaning Technology, follow these steps:
1. Wipe out any loose debris from the oven.
2. Pour water into the oven bottom.
3. Close the oven door and select the AquaLift Self-Cleaning cycle.
4. The cycle will run for under 1 hour at a lower temperature than traditional self-cleaning methods.
5. After the cycle finishes, wipe out the remaining water and loose debris.
For more detailed instructions, refer to the "Clean Cycle" section in the Owner's Manual. You can also visit the Maytag website at http://whirlpoolcorp.com/aqualift for additional information, frequently asked questions, and videos on using AquaLift Self-Cleaning Technology.
Add New Comment