User Manual Q&AAnswer
Mar 21, 2025 - 11:40 PM
To adjust the infrared detection range of the SOYAL R-101-PBI-L Touch-Less Infrared Sensor Push Button, follow these steps:
1. Locate the mounting plate on the wall where you want to install the button.
2. Remove the black ABA xxxx Nut from the button.
3. Install the button onto the selected mounting plate.
4. Use a screwdriver to xxxx the mounting plate securely onto the wall.
5. To adjust the detection range, turn the adjustment xxxx on the button.
- Turn RIGHT to increase the detection range (make it longer).
- Turn LEFT to decrease the detection range (make it shorter).
Please note that the adjustment xxxx may be located on the back or side of the button, depending on the model. Refer to the instruction manual for the specific location of the adjustment xxxx on your model.
It is important to find the optimal detection range for your specific installation to ensure reliable operation. Experiment with different settings until you achieve the desired detection range.
Add New Comment