User Manual Q&AAnswer
Mar 21, 2025 - 11:31 PM
To install the COOPER LIGHTING SOLUTION C6RV042 6 Inch Remodel International Vertical Open Downlight, follow these steps:
1. Ensure that the power to the circuit is turned off before starting the installation process.
2. Determine the location where you want to install the downlight. Make sure there is enough clearance above the ceiling for the housing.
3. Cut a hole in the ceiling according to the specified dimensions for the downlight.
4. Connect the conduit fittings to the housing using the provided xxxx tight connectors.
5. Attach the galvanized steel plaster ring to the housing, ensuring it accommodates the thickness of your ceiling (up to 1").
6. Insert the 4-pin GX24q-3 base socket into the housing, ensuring the lamp spring provides positive lamp retention.
7. Connect the electronic ballast to the socket connector, ensuring proper wiring according to the specified voltage (120V or 277V).
8. Mount the reflector onto the housing, ensuring a tight fit to the ceiling. The reflector is made of .050 thick aluminum and is available in various Alzak® finishes.
9. Choose the desired trim ring option: self-flanged or molded white trim ring. Rimless trim ring accessories are also available.
10. Install the trim ring onto the reflector, ensuring a secure fit.
11. Once the downlight is fully assembled, turn on the power and test the functionality.
Please note that these are general installation instructions. For specific details and options, please consult the COOPER LIGHTING SOLUTION C6RV042 6 Inch Remodel International Vertical Open Downlight Instruction Manual or contact a Cooper Lighting Solutions Representative.
Add New Comment