User Manual Q&AAnswer
Mar 21, 2025 - 12:36 PM
To assemble and install the Dainolite TSY-113LEDT Tinsley 12-in White LED Table Lamp with No Shade, please follow these steps:
1. Ensure that the power is turned off before starting the assembly process.
2. Insert the plug from the adaptor into the lamp base.
3. Adjust the angle and desired height of the lamp by moving the shade.
4. Plug the adaptor into a power outlet and turn on the switch.
Please note the following important safety instructions:
- The LED bulb in this lamp has been permanently installed and does not need to be replaced. Do not attempt to remove or replace the LED bulb.
- Although LED bulbs generate less heat than traditional light bulbs, they still produce some heat. Avoid touching the LED bulb.
- Do not modify the plug, cable, adaptor, or LED bulb.
- When cleaning the lamp, use a soft cloth and avoid using chemical or abrasive cleaners.
It is important to read and follow all safety instructions provided in the manual. If you have any further questions or concerns, it is recommended to contact the manufacturer directly for assistance.
Add New Comment