Answer

Mar 21, 2025 - 12:30 PM
To connect the PowerSpace amplifier to your network, follow these steps:
1. Make sure your computer is connected to the same network as the amplifier or directly to the Ethernet port of the amplifier.
2. Download the Discovery Tool application from bosepro.link/psasw and run it.
3. Power on the amplifier by pressing the Power switch on the front panel.
4. In the Discovery Tool application, click Refresh to see the IP address of the amplifier.
5. Click Configure or enter the IP address manually into your web browser.
6. The PowerSpace configuration utility will open in your browser window.
7. Use the configuration utility to set up and configure the amplifier according to your needs.
Note: The PowerSpace configuration utility is compatible with Google Chrome, Mozilla Firefox, Microsoft Edge, and Internet Explorer.
For more detailed instructions and information, refer to the "Setting Up a PowerSpace Plus Amplifier" section in the installation guide.
Add New Comment