User Manual Q&AAnswer
Mar 21, 2025 - 12:18 PM
Yes, the is compatible with ballasts. To install the LED tube with a ballast, follow these steps:
1. Turn off the power to the fixture.
2. Remove the lens or diffuser (if applicable).
3. Remove the existing fluorescent lamps from the luminaire.
4. Select the desired CCT level using the switch on the LED lamp.
5. Bring the LED lamp to the luminaire and insert the lamp pins into the luminaire lamp holders.
6. Rotate the LED lamp until it locks in place. Make sure the LED lamp front points away from the back of the luminaire.
7. Place the lens or diffuser back in place (if applicable).
8. Switch the power back on.
Please note that proper grounding is required for safety, and the installation must be done in accordance with the National Electrical Code and all applicable local codes.
For more detailed instructions and safety precautions, please refer to the complete manual provided by RAB Lighting.
Add New Comment