How do I install Dainolite Priya 4-Light White Modern/Contemporary Drum Pendant Light? (Dainolite Priya 4-Light White Modern Contemporary Drum Pendant Light Installation Guide)

Answer

manuals.plus

Mar 21, 2025 - 12:11 PM

Installation of the Dainolite PYA-304C Priya 4-Light White Modern/Contemporary Drum Pendant Light involves a few steps. Here is a step-by-step guide to help you with the installation process:

1. Before starting the installation, ensure that the power supply to the area is turned off at the circuit breaker.

2. Carefully unpack the pendant light and check that all the components are included and undamaged.

3. Determine the location where you want to install the pendant light. It should be a suitable location with proper support for the weight of the light fixture.

4. Install the mounting plate to the ceiling using the provided screws and anchors. Ensure that the plate is securely attached to the ceiling.

5. Connect the wiring. The pendant light should have three wires: a black (hot) wire, a white (neutral) wire, and a green or bare copper (ground) wire. Connect the black wire from the pendant light to the black wire from the electrical box, the white wire to the white wire, and the green/bare copper wire to the grounding wire or xxxx .

6. Secure the pendant light to the mounting plate using the provided screws or other hardware. Make sure it is properly aligned and tightened.

7. Install the light bulbs into the pendant light sockets according to the manufacturer's instructions. Use the appropriate type and wattage of bulbs recommended for the fixture.

8. Turn on the power supply at the circuit breaker and test the pendant light to ensure it is functioning properly.

Please note that this is a general guide, and it is always recommended to refer to the specific installation instructions provided by the manufacturer. If you encounter any difficulties or have further questions, it is advisable to contact Dainolite directly for assistance.