User Manual Q&AAnswer
Mar 21, 2025 - 12:08 PM
Thank you for your purchase of the Dainolite PYA-224C 4 Light Incandescent Chandelier. Here is a step-by-step guide to help you with the installation process:
1. Before starting the installation, ensure that the power supply to the installation area is turned off at the circuit breaker.
2. Carefully unpack the chandelier and ensure that all the necessary parts are included. Refer to the manual for a detailed list of components.
3. Determine the location where you want to install the chandelier. Ensure that the ceiling can support the weight of the chandelier and that there is an electrical box or junction box available for installation.
4. Attach the mounting bracket to the electrical box using the provided screws. Make sure the bracket is securely fastened.
5. Connect the chandelier wires to the electrical wires in the junction box. Match the black wire from the chandelier to the black or hot wire in the junction box, the white wire to the white or neutral wire, and the green or copper wire to the ground wire. Use wire nuts to secure the connections and wrap them with electrical tape for added safety.
6. Gently tuck the wires into the electrical box and attach the chandelier to the mounting bracket using the provided screws. Ensure that the chandelier is level and secure.
7. Install the light bulbs into the chandelier sockets. Make sure to use the recommended wattage and type of bulbs as specified in the manual.
8. Turn on the power supply at the circuit breaker and test the chandelier to ensure it is functioning properly.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific manual provided with the product for detailed and accurate installation instructions. If you have any further questions or concerns, you can contact Dainolite directly at the provided contact information.
Add New Comment