User Manual Q&AAnswer
Mar 21, 2025 - 12:00 PM
To install the Dainolite DLEDW-263 3W Wall Lamp, please follow these steps:
1. Ensure that the power is turned off before starting the installation process.
2. If you are using the lamp with the provided adaptor, insert the plug from the adaptor into the lamp cord.
3. Plug the adaptor into a power outlet and turn on the switch.
4. If you prefer to hardwire the lamp, please contact the factory for specific instructions on how to do so.
Important Safety Instructions:
- The LED bulb in this lamp is permanently installed and does not need to be replaced. Do not attempt to remove or replace the LED bulb.
- Although LED bulbs generate less heat than traditional light bulbs, they still produce some heat. Avoid touching the LED bulb.
- When cleaning the lamp, use a soft cloth. Do not use chemical or abrasive cleaners.
- Do not modify the plug, cable, adaptor, or LED bulb.
- These safety instructions do not cover all possible conditions or situations. Please exercise caution when using this product.
If you have any further questions or concerns regarding the installation or usage of the Dainolite DLEDW-263 3W Wall Lamp, please contact the factory directly. Their contact information is provided in the manual.
Add New Comment