User Manual Q&AAnswer
Mar 21, 2025 - 11:38 AM
To change the accessories on the VONROC CT503DC Rotary Multi Tool, follow these steps:
1. Make sure the machine is turned off before mounting an accessory.
2. Press the spindle lock button and hold it.
3. Unscrew the collet chuck by hand.
4. Put the new accessory in its place.
5. Press the spindle lock button when fastening the collet chuck.
6. Do not press the spindle lock button while the motor is running.
It is important to use accessories that are specifically designed and recommended by the tool manufacturer. Make sure the rated speed of the grinding accessories is at least equal to the maximum speed marked on the power tool. The outside diameter and thickness of the accessory must be within the capacity rating of the power tool. The arbor size of the accessory must properly fit the spindle or collet of the power tool.
Always inspect the accessory before each use for any damage. If the power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, run the power tool at maximum no-load speed for one minute to ensure it is securely fastened.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment