User Manual Q&AAnswer
Mar 21, 2025 - 11:36 AM
To connect your YOWHICK GDP01 LCD Video Projector to your computer, you can use the HDMI or VGA connection. Here are the steps:
1. HDMI Connection:
a. Make sure your computer has an HDMI port.
b. Connect one end of the HDMI cable to the HDMI port on your computer.
c. Connect the other end of the HDMI cable to the HDMI port on the projector.
d. Turn on the projector and select HDMI as the input source using the remote control or the menu settings.
e. Your computer screen should now be displayed on the projector.
2. VGA Connection:
a. Make sure your computer has a VGA port.
b. Connect one end of the VGA cable to the VGA port on your computer.
c. Connect the other end of the VGA cable to the VGA port on the projector.
d. Turn on the projector and select VGA as the input source using the remote control or the menu settings.
e. Your computer screen should now be displayed on the projector.
Note: Depending on your computer's operating system, you may need to adjust the display settings to extend or duplicate your screen onto the projector. Refer to your computer's user manual for instructions on how to do this.
For more detailed instructions and troubleshooting tips, please refer to the YOWHICK GDP01 LCD Video Projector User Manual.
Add New Comment