User Manual Q&AAnswer
Mar 21, 2025 - 11:32 AM
To install the Dainolite CMT-418HP Comet 10 Light Black Modern/Contemporary Chandelier, please follow the instructions below:
1. Before starting the installation, ensure that the power is turned off at the circuit breaker or fuse box.
2. Carefully unpack the chandelier and check for any missing parts or broken glass. If you find any issues, contact the factory directly via email at dainolite@dainolite.ca to request replacement parts.
3. Determine the desired location for the chandelier and mark the position on the ceiling. Ensure that the mounting surface is sturdy enough to support the weight of the chandelier.
4. Install the mounting bracket onto the ceiling using the provided screws and anchors. Make sure the bracket is securely fastened.
5. Connect the electrical wires from the ceiling to the wires of the chandelier. Follow the wiring diagram provided in the manual and use wire connectors to make the connections. It is recommended to consult a licensed electrician for assistance if you are not familiar with electrical wiring.
6. Attach the chandelier to the mounting bracket using the provided screws. Ensure that the chandelier is securely attached and level.
7. Install the light bulbs into the sockets. Use the recommended wattage and type of bulbs as specified in the manual.
8. Turn on the power at the circuit breaker or fuse box and test the chandelier to ensure it is working properly.
Please note that these are general installation instructions. It is important to refer to the specific instructions provided in the Dainolite CMT-418HP Comet 10 Light Black Modern/Contemporary Chandelier instruction manual for detailed and model-specific installation steps.
Add New Comment