How do I install the HINKLEY Large Orb on a sloped ceiling? (HINKLEY Large Orb User Manual)

Answer

manuals.plus

Mar 21, 2025 - 11:16 AM

To install the HINKLEY FR47408BLK Large Orb on a sloped ceiling, follow these steps:

1. Ensure that the fixture is suitable for use in dry (indoor) locations as defined by NEC and CEC. It meets United States UL Underwriters Laboratories & CSA Canadian Standards Association Product Safety Standards.

2. Gather the necessary tools for installation, including a ladder, screwdriver, wire cutter/stripper, and electrical tape.

3. Turn off the power to the circuit you will be working on at the main electrical panel.

4. Determine the desired location for the fixture on the sloped ceiling. Ensure that it is centered and at the desired height.

5. Install the mounting bracket onto the electrical box on the ceiling, following the manufacturer's instructions. Make sure it is securely fastened.

6. Connect the electrical wires from the fixture to the corresponding wires in the electrical box. Match the black (hot) wire to the black wire, the white (neutral) wire to the white wire, and the green or bare copper (ground) wire to the green or bare copper wire. Use wire connectors to secure the connections and wrap them with electrical tape for added safety.

7. Carefully lift the fixture and hang it on the mounting bracket. Ensure that it is securely attached.

8. Adjust the length of the chain or cable to the desired height. Cut any excess length using a wire cutter if necessary.

9. Restore power to the circuit at the main electrical panel.

10. Test the fixture to ensure it is functioning properly.

Please note that these instructions are a general guideline. It is always recommended to consult the specific user manual provided by the manufacturer for detailed and accurate installation instructions.