User Manual Q&AAnswer
Mar 21, 2025 - 10:49 AM
Installation of the Dainolite PHL-264P Philis 4-Light Beige Transitional Drum Pendant Light involves the following steps:
1. Power off: Before starting the installation, ensure that the power to the electrical circuit is turned off at the breaker panel.
2. Mounting: Determine the desired location for the pendant light and mark the spot on the ceiling. Use appropriate hardware (not included) to securely mount the mounting plate to the ceiling.
3. Wiring: Connect the electrical wires from the ceiling to the corresponding wires on the pendant light fixture. Follow the color-coded wiring instructions provided in the installation guide. It is recommended to consult a licensed electrician if you are unsure about the wiring process.
4. Hanging the pendant light: Once the wiring is complete, attach the pendant light fixture to the mounting plate using the provided hardware. Ensure that the fixture is securely fastened.
5. Bulb installation: The Dainolite PHL-264P requires four E26 base bulbs with a maximum wattage of 100W each. Insert the bulbs into the sockets, making sure they are securely seated.
6. Power on: After completing the installation, turn on the power at the breaker panel and test the pendant light to ensure it is functioning properly.
Please note that it is always recommended to refer to the official installation guide provided by the manufacturer for detailed instructions specific to your product model.
Add New Comment