User Manual Q&AAnswer
Mar 21, 2025 - 05:40 AM
To install the Dainolite PRA-241P-MB-500 Priscilla Grey Modern-Contemporary Dome Pendant Light, please follow the steps below:
1. Before starting the installation, make sure to turn off the power supply to the area where you will be installing the pendant light.
2. Remove the existing light fixture, if any, by unscrewing the mounting screws and disconnecting the electrical wires.
3. Carefully unpack the pendant light and ensure that all the necessary parts are included. These typically include the canopy, mounting bracket, screws, wire nuts, and the pendant light fixture itself.
4. Attach the mounting bracket to the electrical box in the ceiling using the provided screws. Make sure the bracket is securely fastened.
5. Connect the electrical wires from the ceiling to the corresponding wires on the pendant light fixture. This usually involves matching the black (hot) wire with the black wire, the white (neutral) wire with the white wire, and the green or bare copper (ground) wire with the green or bare copper wire. Use wire nuts to secure the connections and ensure they are tightly twisted.
6. Gently tuck the connected wires into the electrical box, making sure they are not pinched or exposed.
7. Lift the pendant light fixture and align the holes on the canopy with the screws on the mounting bracket. Securely tighten the screws to hold the fixture in place.
8. Once the pendant light is securely mounted, restore power to the area by turning on the circuit breaker.
9. Test the pendant light by flipping the switch. If it does not turn on, double-check the wiring connections and ensure they are properly secured.
If you encounter any difficulties during the installation process or have any further questions, please refer to the installation guide provided with the product or contact Dainolite directly using the contact information provided.
Add New Comment