User Manual Q&AAnswer
Mar 21, 2025 - 05:36 AM
Installation of the Dainolite POR-163FH-MB-WH Porscha 3-Light 16-Inch White Incandescent Flush Mount Light is relatively straightforward. Here is a step-by-step guide:
1. Ensure that the power is turned off at the electrical panel before starting the installation process.
2. Open the package and check that all the necessary parts are included. The package should contain the light fixture itself, screws, and any additional components mentioned in the instruction manual.
3. Familiarize yourself with the dimensions of the light fixture. This information can be found in the "DIMENSION" section of the manual. It will help you determine the appropriate location for installation.
4. Determine the location where you want to install the flush mount light. It should be a suitable surface that can support the weight of the fixture.
5. Position the fixture over the desired location and mark the spots where the screws will go. Use a level to ensure that the fixture will be installed evenly.
6. Drill pilot holes at the marked spots to make it easier to xxxx in the fixture.
7. Attach the fixture to the ceiling or wall using the provided screws. Make sure it is securely fastened.
8. Connect the wiring according to the instructions provided in the manual. It is recommended to consult a qualified electrician if you are not familiar with electrical wiring.
9. Once the wiring is connected, attach the light bulbs to the E26 base sockets. The manual states that three bulbs with a maximum wattage of 60W each can be used. Please note that the bulbs are not included with the fixture.
10. Double-check all the connections and ensure that everything is properly installed.
11. Turn on the power at the electrical panel and test the light fixture to ensure it is functioning correctly.
If you encounter any difficulties during the installation process or have specific questions about the product, it is recommended to contact Dainolite directly. Their contact information can be found in the "CONTACTS" section of the manual.
Add New Comment