Answer

Mar 21, 2025 - 05:09 AM
To install the Angled Graphics Card Kit 4.0 in the Sharkoon REV300 PC Case, please follow these steps:
1. Start by attaching the mounting bracket of the Angled Graphics Card Kit to the mainboard tray of the REV300 case. Use the provided mounting screws to secure it in place.
2. Next, connect the PCIe 4.0 x16 riser cable to both the mainboard and the graphics card. The riser cable has gold-plated connectors for optimal data transfer. The cable length is 17.5 cm.
3. Carefully insert the graphics card into the PCIe slot on the Angled Graphics Card Kit. Ensure that it is securely seated.
4. Once the graphics card is properly installed, you can position it at a new angle with the fans facing towards the side panel of the case. This allows for better visibility of the fans and any visual highlights or illumination on the graphics card.
5. Finally, make sure to manage the cables neatly to avoid any interference with the graphics card or other components.
By following these steps, you can successfully install the Angled Graphics Card Kit 4.0 in the Sharkoon REV300 PC Case and enjoy the benefits of a visually enhanced gaming experience and fast data transfer provided by the PCIe 4.0 standard. For more detailed instructions, please refer to the owner's manual of the Sharkoon REV300 PC Case and the Angled Graphics Card Kit 4.0.
Add New Comment