How do I install the Dainolite 4 Light Incandescent Pendant? (Dainolite 4 Light Incandescent Pendant Instruction Manual)

Answer

manuals.plus

Mar 21, 2025 - 04:52 AM


To install the Dainolite POR-304P-MB-WH 4 Light Incandescent Pendant, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Before starting the installation, ensure that the power to the circuit is turned off at the breaker panel.

2. Carefully unpack the pendant and check for any damages or missing parts. If any issues are found, please contact Dainolite customer service for assistance.

3. Attach the mounting bracket to the electrical box on the ceiling using the provided screws. Ensure that the bracket is securely fastened.

4. Connect the electrical wires from the pendant to the corresponding wires in the electrical box. Use wire nuts to secure the connections and ensure proper insulation.

5. Carefully lift the pendant and align the mounting holes on the fixture with the screws on the mounting bracket. Securely tighten the screws to hold the pendant in place.

6. Install the light bulbs into the sockets of the pendant. Ensure that you are using the correct type and wattage of incandescent bulbs as specified in the manual.

7. Once the pendant is securely installed, turn on the power at the breaker panel and test the light by flipping the switch.

Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instructions provided in the Dainolite POR-304P-MB-WH 4 Light Incandescent Pendant instruction manual for accurate and detailed installation steps.